Got a Plumbing Emergency? Call us now: 01675 489480
Need a Quotation? Click here to contact us
Got a Plumbing Emergency? Call us now: 01675 489480
Need a Quotation? Click here to contact us
Got a Plumbing Emergency? Call us now: 01675 489480
Need a Quotation? Click here to contact us

Avoid Boiler Breakdowns

HomeAll ServicesAvoid Boiler Breakdowns
HOW TO AVOID BOILER BREAKDOWNS

 

Most people, it’s safe to say, take their boiler for granted. It sits in the background, doing its job and it can be easy to ignore until something goes wrong.  There is, however, a lot you can do to help reduce the risk of your boiler breaking down at just the wrong moment.

 

HAVE AN ANNUAL BOILER SERVICE

 

Most installers will recommend an annual service and, for the cost, it’s an excellent way to regularly maintain the integrity of your boiler and your radiators. Your service will normally involve checking for potential problems and working to solve minor issues that can quickly build into bigger problems. An annual service takes about half an hour or so but can save you a big slice of money by reducing the potential for costly breakdowns in the future. Annual boiler services are also required by manufacturers to ensure boiler warranties are kept valid. If a new boiler is not properly maintained, the manufacturer is within their rights not to honour the warranty.

 

BLEEDING YOUR RADIATORS

 

It pays to check your radiators every so often. Just put your hand on the top and if they feel cold, you need to give them a bleed. At the side of the radiator is a nut which you can open with a key and let out the air. Have a cup or bucket handy to catch the water once it starts to come through. This is something anyone can do and doesn’t require a qualified engineer. Older radiators generally need this doing more regularly than newer ones but making sure you keep on top of it ensures less pressure is put on your boiler too.

 

PROTECTING PIPES IN WINTER

 

The problem with frozen pipes is they can not only damage your home when they suddenly thaw out but can also affect your heating system. You should make sure that all pipes that are exposed to icy conditions are insulated to avoid freezing. If you are in the middle of a particularly cold snap, try to programme your boiler to switch on every so often while you are out or during the night just to keep the water from freezing. During winter periods the condensate waste pipe may also freeze up, which will cause the boiler to stop working. If this happens you can attempt to defrost the pipe yourself, a hot water bottle can be used on the frozen area or pour warm (not boiling) water over the frozen section of pipe.
 
 
GET A POWERFLUSH

 

Over time your radiators get filled with sludge that can block them up and cause problems. A powerflush is a process that removes all this mess and needs to be carried out by a qualified heating engineer with the right equipment. It basically forces water through your central heating system and cleans it out and can help cure problems like noisy radiators as well as ease pressure on your boiler.

 

INSTALL A MAGNETIC SLUDGE FILTER

 

Highly recommended by both gas engineers and boiler manufacturers, Magnetic Sludge Filters do a great job of protecting your boiler from black sludge (iron oxide). Located on the return pipe of your boiler, the filter collects the sludge thanks to a powerful magnet. The sludge is then removed from the system completely. A sludge filter provides ongoing boiler protection and can prevent many boiler issues from occurring.

 

PUT YOUR HEATING ON IN JULY

 

Most of us tend to leave the heating off over the summer. Switching it on during this time is, however, a good idea as it can stop parts in your boiler seizing up because they are not being used. Putting the heating on for half an hour here and there can certainly help maintain your system better.

 

TOPPING UP YOUR BOILER

 

Modern boilers are what is known as sealed systems, which means every now and then they will need replenishing with water. The central heating system needs to be filled up to an ideal pressure of between 1 and 1.5 bar. Filling the system involves keeping an eye on the pressure gauge and turning the handles to let water into the system. You will usually hear the water entering and the pressure can rise quite quickly so remember to switch off when the pressure reaches between 1 and 1.5 bar. If there is a leak on the system or you bleed your radiators the pressure will drop. Topping up after bleeding the radiators will remedy the problem, however if you have a leak it will need to be fixed otherwise the system will not hold pressure.

 

If in doubt contact our Service department on 01675 489480.  We’re more than happy to provide advice and answer any of your questions over the phone.
Get a Quote Today!

15 Comments

Leave a comment

© Stewarts Service and Maintenance Limited 2024. Website developed by Digital Process Solutions
© Stewarts Service and Maintenance Limited 2024. Website developed by Digital Process Solutions